DHWM 300
A+
-
Daily electricity consumption Qelec_ACC4,352 kWh
-
AEC annual electricity consumption935 kWh
-
Storage volume V285,0 l
Operation range +12°C to +40°C.
Heating of water up to 65°C.
Electric emergency/booster heater factory-fitted as standard for an occasionally higher hot water demand.
Technical properties
Characteristics
Declared load profile
XL
Energy efficiency class
A+
Energy efficiency ƞwh
179 %
AEC annual electricity consumption
935 kWh
Daily electricity consumption Qelec_ACC
4,352 kWh
Thermostat temperature settings
55 °C
Sound power level LWA, indoors
59 dB(A)
Storage volume V
285,0 l
Mixed water at 40°C
395 l
Technical characteristics
Heating time A15/W10-55
08:15 h:min
Heating time A20/W10-55
07:14 h:min
Energy consuption by choosen cyclus A15 / W10-55
4,74 kWh
Energy consumption by chosen cycle A20 / W10-55
4,36 kWh
COPDHW(A15/W10-55) EN16147
4,0
COPDHW (A20/W10-55) EN16147
4,4
Standby power input according to EN16147
17 W
Refrigiant
R134a (GWP 1430)
Quantity of refrigiant
1,100 kg
Working range - air temperature
+7 / +40 °C
Electrical specifications
Nominal electrical power -compressor
475 W
Maximum power consumption
2750 W
Number of el.heaters x power
2 x 1000 W
Voltage/Frequecy
230/50 V/Hz
Electric protection
16 A
Degree of protection
IP 22
Storage tank
Enamelled steel / Protection Mg anode
+/+
Working pressure
0,6 (6) / 0,9 (9) Mpa (bar)
Max temperature
Hot water tank heat pump
65 °C
Hot water tank electric heater
75 °C
Hot water tank heat exchanger
/
Dimensions and connections
Average thickness of insulation
67 mm
Connections to the supply network
G 1
Connections to the heat exchanger
0
Max working pressure heat exchanger
0
Surface area of the heat exchanger lower/upper
0
Heat exchanger volume bottom /top
0
Exchange power in continuous mode (max. coil output)
0
Continous output ΔT=35K
0
Net/Gross/Weight with water
118/130/403 kg
Transportation data
Packaging dimensions [WxDxH]
800x800x2160 mm